Saab Electrical

Saab Electrical Service Tips

  • Keep your battery terminals clean and the connections tight.  Do not over tighten!
  • The battery should not be allowed to run dry.  Top off with distilled water if possible.
  • If replacing the alternator, replace the alternator bushings and belts as required.  If marginal at all, replace at the same time.
  • If the alternator bearings and bushings are good the regulator and brush assembly can be replaced without removing the alternator.
  • Belts are important and can affect the operation of the system as worn and glazed belts can slip as well as make noise.  Replacing belts on a regular schedule will prevent this as well as guarantee that you won’t be stranded by a broken belt.
[Saab Parts] [Saab Clutch] [Saab Exhaust] [Saab Wheels] [Saab Ignition] [Saab Electrical] [Contact Us]

Powered by WebRing.